Reset Filter
Close
Brands
Categories
Applications
Materials
Product list (198)
Apply Filter
VAG | AW Horizontal Disc Check Valve
Straight-seat check valve with external shaft, lever and weight. Highly cost-efficient due to high opening degree. Available with stainless-steel wire guard and limit signal for the open position as options. Its premium-quality materials make the valve particularly resistant to the media conveyed. T... (Read More)
VAG | AW Vertical Disc Check Valve
Straight-seat check valve with external shaft and lever and weight. Highly cost-efficient due to high opening degree. Available with stainless-steel wire guard and limit signal for the open position as options. Its premium-quality materials make the valve particularly resistant to the media conveyed... (Read More)
VAG | BEV Air Valve
Single-chamber air valve for venting and releasing small to medium amounts of air in pipelines as well as for releasing air during operation. Suitable for use in water treatment, water distribution and in pressure management.... (Read More)
VAG | CEREX Butterfly Valve
Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in waste-water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and disk with triple bearing. Suitable for use in wastewater.... (Read More)
VAG | DUOJET Air Valve
High-capacity, single-chamber air valve with triple function for venting and releasing air in pipelines as well as for releasing air during operation. Corrosion-proof due to stainless steel inner parts and float made of plastic. Safe and reliable operation even at high air-release velocities of up t... (Read More)
VAG | ECO-Centric Eccentric Plug Valve
The VAG/GA Industries Figure B517 ECO-centric Plug Valve is a rugged, field-proven valve that will provide many decades of trouble-free service. Its flow efficient round port provides lower head loss, higher capacity and better solids handling ability than a standard rectangular port plug valve.&... (Read More)
VAG EKN | MT Double Eccentric Butterfly Valve - Hot Water
Double-offset flanged butterfly valve (resilient-seated) with AL-Bronze coating for high temperatures. Long service life, as the medium does not come into contact with the bearing, and due to the wear-resistant, corrosion- and infiltration-proof seat with weld overlay. Suitable for use in power plan... (Read More)
VAG EKN Double Eccentric Butterfly - HYSEC Hydraulic Brake and Lift
The VAG HYsec hydraulic brake and lift unit meets all the requirements of safe and reliable operation. Combined with a VAG EKN® Butterfly Valve or a VAG RIKO® Plunger Valve, it serves as a quick-closing safety valve at turbine inlets and in pumping stations, as a pipe-b... (Read More)
VAG EKN | Double Eccentric Butterfly Valve
Through this geometry, the circumferential seal is moved away from the seat and thus the strain on it is relieved when the valve opens. This minimises wear and ensures a long service life.... (Read More)
VAG | EKO Plus Gate Valve
Resilient-seated gate valve with bolted cover connection and face-to-face length of Basic Series 14 for water applications. Proven design with innovative improvements, such as sliding caps, guarantee low operating torques even after many years of use. Suitable for water-treatment applications, water... (Read More)
VAG | HADE Flap Valve PTK-BS
Flap valve with slanted disk to ensure discharge of the medium preferably below the water level. Attachment by slip-on sleeve. Easy mounting due to low weight and absolute corrosion resistance due to the PE-HD material. Opens even at low differential pressure due to the low-resistance disk bearing. ... (Read More)
VAG KFS Gate Valve
Metallic-sealing gate valve with flat-type face-to-face length of Basic Series 14 for waste-water applications. The zinc-free bronze seat rings and stem nut make it particularly resistant to media contained in waste water. Also suitable for industrial applications.... (Read More)
VAG KOS | Gate Valve | Oval
Metallic-sealing gate valve with oval-type face-to-face length of Basic Series 15 for waste-water applications. The zinc-free bronze seat rings and stem nut make it particularly resistant to media contained in waste water. Depending on its nominal diameter, it can also be used for pressures of up to... (Read More)
VAG KRV | Ball Check Valve
Resilient-seated non-return valve with sinking ball and free flow passage for minimum friction loss. Especially suitable for use in polluted media as the shape of the valve prevents the build-up of dirt. Highly maintenance-friendly due to the large clean-out hole. Suitable for use in waste-water app... (Read More)
VAG | LIMU-STOP® Non-Return Valve
Resilient-seated non-return valve with slanted seat and external shaft. With lever and weight. Highly cost-efficient due to its large opening degree. Suitable for use in water and wastewater systems.... (Read More)
VAG MONO | Knife Gate Valve
Resilient-seated knife-gate valve in fully flanged design, sealing in both flow directions, with integrated scraper system and free flow passage with control orifice for precise regulation. Due to the integrated stainless-steel control orifice with optimised control characteristic and free bottom pa... (Read More)
VAG | RETO-STOP Non-Return Valve
Resilient-seated, slanted-seat check valve that opens even at low differential pressures. The disk can be used on both sides, which doubles its useful life. The one-piece and completely rubber-coated disk ensures a completely free passage and reduces the adhesion of dirt particles. Suitable for both... (Read More)
VAG | SERIO®plus Position Indicator
Mechanical or electrical position indicator for valves in plants for teletransmission of the open and closed positions. Suitable for use in water-treatment applications, water distribution, in waste water, in dams, power plants, in industry, in pressure management and in gas pipelines.... (Read More)
VAG | SKR Slanted Seat Tilting Disk Check Valve
Metallic-sealing non-return valve with slanted seat for reducing the closing time and with specially shaped disk that supports the opening movement. Also available with internal damping unit for the reduction of pressure surges. The prerequisite for trouble-free operation is a minimum flow velocity ... (Read More)
VAG | Spring-Loaded Air Valve
Spring-loaded air valve with very high venting capacity for rapid discharge of the medium present in the pipeline, for air release when filling the pipeline and during operation. Large cross-section for venting large amounts of air during fast switch-off procedures, rapid discharge or pipe bursts. U... (Read More)
VAG TOP-STOP® | Diaphragm Non-Return Valve
Resilient-seated non-return valve with diaphragm and internal flow guide for the fast and noiseless shut-off against the return flow. Suitable for installation in any position. Due to the elastic diaphragm the valve has optimum pressure-surge damping properties. Suitable for use in water treatment a... (Read More)
VAG TWINJET®-S Automatic Air Valve
Double-chamber air valve with triple function for venting and releasing air in pipelines as well as for releasing air during operation. Highly reliable function and low maintenance due to the float made of plastic. Suitable for use in water treatment, water distribution, in dams, power plants, in in... (Read More)
Protego | Pressure Relief Valve
The P/EL type PROTEGO® valve is a highly developed pressure relief valve. It is primarily used as a device for relieving pressure in tanks, containers and process engineering equipment. The valve protect against unallowable overpressure and prevents the unacceptable loss of product... (Read More)
EVR | Flanged Series Rubber Duckbill Check Valve
The Series CPF Flanged Rubber Duckbill Check Valve is designed to be efficient, quiet and tough. It requires no external power sources, thereby reducing operating costs. The simple design means there are no moving mechanical parts to break down or jam, reducing maintenance costs. This type ... (Read More)
EVR | In-line Rubber Duckbill Check Valve – Series CPI-IN
Designed to be mounted inside a pipe, the CPI-IN Rubber Duckbill Check Valve easily handles corrosive or abrasive materials such as raw sewage, sludge or slurries. Their flexible design allows solids to pass through unhindered and can even surround solids trapped in the valve. Series CPI-IN Rubber D... (Read More)
EVR | Jacket Series Rubber Duckbill Check Valve – Series CPJ
The Series CPJ Jacket Rubber Duckbill Check Valve is designed to be efficient, quiet and tough. It requires no external power sources, thereby reducing operation costs. The valve’s simple design means there are no moving mechanical parts to break down or jam, reducing maintenance costs.... (Read More)
EVR | Series CPO Slip-On Rubber Duckbill Check Valve
The Series CPO Slip-On Rubber Duckbill Check Valve is designed to be efficient, quiet and tough. It requires no external power sources, thereby reducing operation costs. The valve’s simple design means there are no moving mechanical parts to break down or jam, reducing maintenance costs. Th... (Read More)
EVR | Petite Pinch Valve – Type SE
The Series SE valve features a machined steel body and end fittings with a corrosion resistant, electroplated finish. This valve is also available with stainless steel body. Series SE Petite Pinch Valves are extremely durable and ideal for many different applications including mining, was... (Read More)
EVR | Pinch Valve – Series AJ
The Series AJ Pinch Valve features a simple, cost-effective design, perfect for dealing with problematic abrasive materials. The valve’s split body is designed to allow quick and easy sleeve replacement and is available in a variety of materials. Replacement sleeves for the AJ Valve... (Read More)
Protego | Flame Arresters - End Of Line Deflagration
Flame Arresters are designed to allow the flow of gases, liquids, etc. and to prevent flame transmission.PROTEGO® Flame Arresters are composed of individual FLAMEFILTER® (flame arrester discs), spacers, and a casing. The FLAMEFILTER® is... (Read More)
Protego | Inline Flame Arresters - Deflagration
Flame Arresters (or ‘flame arrestors’) are designed to allow the flow of gases, liquids, etc. and to prevent flame transmission.PROTEGO® Flame Arresters are composed of individual FLAMEFILTER® (flame arrester discs), spacers, and a ca... (Read More)
Protego | Inline Flame Arresters - Detonation
Flame Arresters (or ‘flame arrestors’) are designed to allow the flow of gases, liquids, etc. and to prevent flame transmission.PROTEGO® Flame Arresters are composed of individual FLAMEFILTER® (flame arrester discs), spacers, and a ca... (Read More)
Monitor | DUST ALARM® ES Broken Bag Detector / Dust Monitor
The DustAlarm Broken Bag Detector provides reliable and economical detection of leaks and filter failures in many powder and bulk solids industries. The DustAlarm is successfully utilized in a wide variety of applications where detection of dust levels is critical either to safety, maintenance, equi... (Read More)
Monitor | Solids Flow Detection
Monitor's line of microwave solids flow monitors are high quality, industrial grade instruments capable of providing a signal indicating the flow/no-flow condition of solids and powders in gravity chutes, feeders and pneumatic pipelines. The Model SFD-2 Solids Flow Detector provides relay outputs th... (Read More)
Monitor | Evasser Bin Aerator
The Evasser bin aerator from Monitor Technologies is a device used to promote the flow of dry bulk powders from a storage vessel without the noise and damaging vibration caused by pneumatic or electric vibrators. The Evasser aerator is small, compact and capable of aerating many types of bulk pow... (Read More)
Monitor | Rectangular Air Pad
The Monitor air pad bin aerator is an aeration device used to promote the fluidization and flow of dry bulk powders / materials from a storage vessel (bin, silo, hopper).... (Read More)
Barriquand | PLATULAR® SMART HYBRID WELDED PLATE HEAT EXCHANGER
The Platular® fully welded plate heat exchanger’s thermal performance and minimal temperature approach is particularly suitable for exchanges on difficult, viscous fluids or fluids chargedwith suspended materials, but also fo... (Read More)
Komax | Klean-Wall Heat Exchanger - Sludge To Water
The sludge heat exchanger, or Komax Klean-Wall® Heat Exchanger, is mainly utilized for heating municipal sludge, FOG (Fats/Oils/Grease), or manure for aerobic/anaerobic digestion purposes. It is typically installed in a recirculation loop with a digester. The sludge heat exchanger ca... (Read More)
Komax | Sanitary Inline Steam Heater – CIP Certified
The Komax sanitary inline steam heater is made of stainless steel, polished (or electropolished), and designed for CIP process. The typical applications for the sanitary inline steam heater in the food and beverage industry are heating of water, CIP (clean in place) solutions, and other heavy vis... (Read More)
Komax | Direct Injection Steam Heater
The Komax Direct Injection Steam Heaters are made per specification in sizes from 2” to 24”. They are used to directly inject saturated steam in order to heat and maintain water like products to/at a certain temperature, dependent of the process requirement, using the Komax patented Equa... (Read More)
Komax | Scepter Tank Heater
This versatile series of steam heaters is designed for the direct injection of steam into tanks for heating water compatible products in a quiet, vibration free, and 100% efficient fashion. In addition the tank heater develops a strong stirring action to help keep any solids or particulates in suspe... (Read More)
AECO | Inductive Sensors
The inductive sensors are electronic transducers that generate an output signal when a metal object (iron, aluminium, copper, brass, etc.) enters their sensitive area from any direction, without coming into contact with them.... (Read More)
AECO | Capacitive Sensors
Capacitive sensors are electronic transducers that generate an output signal when any solid or liquid material (wood, metal, plastic, water, alcohol, etc.) enters their sensitive area, without necessarily coming into contact with them.They can be used for applications such as tr... (Read More)
Aeco | Magnetic Reed Sensors and Magnets
Reed magnetic sensors consist of a reed switch with contacts housed in a protective glass envelope containing inert gas that reduces mechanical and electrical wear, while guaranteeing reliable operation (up to 100 million switches).The whole is enclosed in a plastic or metal cas... (Read More)
AECO | Photoelectric Sensors
The Photoelectric Sensors are modulated light emission electronic transducers that generate an output signal when an object enters their range of operation.... (Read More)
cleanwater1 | Chemlocker®
The Chemlocker® Reservoir Dosing Station Provides Flexibility and Econo... (Read More)
cleanwater1 | Monoclor®
The Monoclor® RCS chloramine management system generates a constant and reliable chloramine residual within the reservoir by creating a homogeneous mixture, introducing chemicals rationally and monitoring the equilibrium with control logic in real time. SmartBoost® syst... (Read More)
cleanwater1 | Microclor®
Microclor® On-Site Hypochlorite Generation (OSHG) is the safe, reliable and sustainable solution for water or wastewater disinfection. As concerns mount regarding the safety and security of using chlorine gas for water disinfection, many utilities are choosing sodium hypoch... (Read More)
Steinhardt | Easyslide
EasySlide Discharge RegulatorA simple sensor-based discharge control for constant flows.The EasySlide discharge control unit can be retrofitted into existing foul and surface water systems. The system permits a maximum pass... (Read More)
Steinhardt | ElectroSlide Flow Regulator
Intelligent discharge control system high precision — from 5–5000 l/s –modular extension.The ElectroSlide Flow Regulator is a specially designed penstock enabling accurate flow calibration. The penstock is driven by an actuator, and can be ... (Read More)
Steinhardt | HydroScreen FSRB
The Steinhardt HydroScreen Model FSRB is designed as an arc-screen which increases the flow rate. It matches the curved form of the inlet pipe. It is usually positioned lying horizontal in front of the overflow crest. The Steinhardt arc-screen is installed sitting from 0 to 45°, as well as paral... (Read More)
Wiegert & Bahr | Power Plant Construction
HYDROPOWER MEANS FUTURE. Through the consumption of fossil fuels, the technologies of the future will depend on renewable energy sources like hydropower. Wiegert & Bahr for 5 decades in the field of generating electric... (Read More)
Wiegert & Bahr | Turbines
Turbines and Hydraulic Steel Structures ... (Read More)
Wiegert & Bahr | Hydraulic Steel Structures
Sustained, renewable. HYDROPOWER MEANS FUTURE.Through the consumption of fossil fuels, the technologies of the future will depend on renewable energy sources like hydropower. Wiegert & Bahr work for 5 decades in the field of generating electric... (Read More)
Steinhardt | HydroSlide®
HydroSlide® Automatic Regulator Type GM External energy-free flow regulator with automatic blockage clearance ... (Read More)
Steinhardt | HydroSlide® Automatic Regulator Type Combi
External energy-free, compact flow regulator with automatic blockage clearance for wet and semi-dry installation.The automatic HydroSlide® Type Combi Flow Regulator is available as Standard (CS) model or as the FlatFlow (... (Read More)
Steinhardt | HydroSpin® Floatables Removal
Bar and brush screens are very effective solutions for retaining floatables and suspended solids within the sewer and allowing the debris to be transported to the wastewater treatment plant. However, stressed budgetary situations often delay such investments. Screening machinery is highly effective ... (Read More)
Steinhardt | HydroStyx® Discharge Brake
Delays discharge and activates unused sewer volume. A sewer system usually has large amounts of unused storage capacity since it was designed to cope with peak flows. The HydroStyx® discharge brake allows... (Read More)
Steinhardt | HydroSurf Skimmer and Decanter
The HydroSurf Skimmer and Decanter are manufactured completely of stainless steel. They are equipped with a wear-free, smooth-running and water-tight swivel joint. One 90° elbow is connected to the drainage pipe, the other 90° elbow to the outlet pipe. To enable the ... (Read More)
Steinhardt | HydroTwister® Dynamic Vortex Separator
External energy-free separation of coarse, suspended and floating solids in one compact structure. The HydroTwister® Vortex Separator consists of a compact circular concrete shaft with an interior treatment unit, giving a round outer and inner treatment... (Read More)
Steinhardt | HydroGuard® Inverted Siphon Flush
Innovative inverted siphon flush for continuous cleaning of underpass pipes.The HydroGuard® Inverted Siphon Flush is installed downstream of the inverted siphon at a convenient manhole. It consists of a flushing shield, an electro-hydraulic drive, w... (Read More)
Steinhardt | HydroGuard® Sewer Flush
The HydroGuard® Sewer Flush is a device for continuous, automatic cleaning of medium-sized pipes (DN 600 — 3000). Use of the HydroGuard® Sewer Flush reduces the frequency of overflow spills, equalizes the biologica... (Read More)
Steinhardt | Overflow Wedgewire Screens
The HydroScreen Wedge Filter Screen MECMEX® has been specially developed for filtering combined water and effectively retaining all solid matter larger than 6 x 6 mm (approx. 34 % SRV*, WIGAN Test**).The screen can be installed in fixed position before the existing overflow edge or, if requir... (Read More)
Steinhardt | HydroM.E.S.I.® particle separator type STATIC
The HydroM.E.S.I.® is a flexible system, extendable by modules, for the high-performance separation of particulates by sedimentation from combined and surface water discharges. The HydroM.E.S.I.® particle separator type STATIC i... (Read More)
Steinhardt | HydroFlush® Sewer Flush Type SH
Automatic flushing siphon for foul and surface water sewers.HydroFlush® Sewer Flush Type SH can provide that cleaning by sending a flushing wave periodically to mainta... (Read More)
Steinhardt | SFRF Screen
High-performance modular screens for Combined Sewer Overflows (CSO). The Steinhardt® HydroScreen Fine Bar Screen Type FSRF is a flat bar screen. It is installed horizontally on the overflow wall within combined sewerage systems. The spill flow ris... (Read More)
Steinhardt | Hydrobeam Aqua Roll
The Aqua Roll Bulkhead works, even in the house owner’s absence, at night, at the weekend or when flood waters are rising fast. When the water sensor sounds the alarm, the Aqua Roll Bulkhead rises automatically from its socket, which is installed under a door or window. Stainless steel roll su... (Read More)
Steinhardt | HydroLatch® Flood gates
Reliable flood protection for sewerage and watercourse systems. The top-hinged HydroLatch® flood gates Model HLA-HK can be appl... (Read More)
Steinhardt | HydroBeam® Stoplog System
Mobile flood protection – suitable for uneven terrain.With the HydroBeam Stoplog System Steinhardt GmbH offers a high-end, mobile protection barrier to provide quick and effective securing of large areas against flooding. The standardised system i... (Read More)
Steinhardt | HydroBend Weir Gates
Adjusts overflow heights, increases storage volume, hydraulic or energy-free options.HydroBend weir gates are mounted on spillway dams. They are bottom-hinged. If the water level ... (Read More)
Steinhardt | HydroBend Weir Gates
Steinhardt |HydroClean® Brush Screen
Self-cleaning brush screen for CSO discharges – external energy free, hydraulically or electric-powered. The HydroClean® self-cleaning brush screen traps solid pollutants reliably and continuously... (Read More)
Steinhardt | HydroGuard® Flushing and impounding protection
Swivel-mounted impounding shield for larger canal and canal network management.The HydroGuard® flushing and impounding protection is not only a product but also a system for the complete management of large canals, whole canal networks as well as for in... (Read More)
Steinhardt | HydroPass Separating Unit/Canal Separator
Equipment for combined and separate sewer systems.The HydroPass units are designed and supplied with internal controls bespoke to the site requirements..... (Read More)
Steinhardt | HydroSelf® Gate Flushing System
High efficiency flushing for tanks and sewer channels.The HydroSelf® flushing system uses retained water to clean the floor of storage tanks with extremely high efficiency. It operates without external power and re... (Read More)
Steinhardt | HydroSelf® Tank Flush
High efficiency radial flushing for circular and small rectangular tanks.The HydroSelf® Tank Flush for circular and small rectangular tanks is a container-ised ... (Read More)
Steinhardt | HydroSelf® Tipping Bucket
Automatic flushing system for new and existing stormwater tanks. ... (Read More)
Steinhardt | HydroSelf® Tipping Bucket
Automatic flushing system for new and existing stormwater tanks. ... (Read More)
cleanwater1 | PolyBlend
Polymer Feed and Control - Since 1982 the PolyBlend® Series remains the leader in automated polymer blending feed systems. Our proprietary designs feature two-stage mechanical mixing with shear velocities designed for optimum initial wetting followed by dissolution to utilize the full... (Read More)
cleanwater1 | Chemical Metering Pumps
UGSI Chemical Feed, Inc. offers several types of metering pumps with integrated controls capabilities, including solenoid-driven, mechanically actuated, hydraulically actuated and peristaltic pumps as well as integrated dosing and controls packaged systems for municipal and industrial markets.... (Read More)
cleanwater1 | Dry Chemical Feed
We offer a variety of technologies for feeding and metering dry chemicals commonly used in the treatment of municipal and industrial water and wastewater. Our extensive line of volumetric screw and belt-type volumetric and gravimetric feeders, feeder tank systems, lime-slaking systems and... (Read More)
PAX | PWM100 Water Tank Mixer
The PAX Water Mixer (PWM100) is an active vortex mixer for small water storage tanks. Patented PAX technology provides the most powerful mixing for small tanks to thoroughly circulate the entire tank volume. The mixer features a self-install design that translates into significant cost and labor sav... (Read More)
cleanwater1 | PAX Impeller Mixers
The PAX Water Mixer is an active, submersible mixing system for the cost-effective management of drinking water quality in storage tanks and reservoirs. The mixer installs easily without service disruptions or tank modifications and mixes on-demand (24/7/365) to create temperature stability, uniform... (Read More)
Komax | Custody Transfer Mixer
Komax Custody Transfer Mixer or CT mixer are installed upstream of the sampling point in a crude oil transfer line. They assure that the bottom sediment and water – B, S & W – is thoroughly dispersed throughout the crude oil stream. An even water droplet size and distribution occurs ... (Read More)
Komax | Sludge Mixer
Non-clogging Static Sludge Mixer.Sludge Mixer (Non-Plugging / Non-Fouling Very low pressure drop)The KOMAX Hi-Pass™ Sludge Mixer is designed to effectively mix polymer solution into sludge flows prior to dewatering p... (Read More)
Komax | Static Mixer
The Komax Triple Action Mixer provides the highest level of mixing of any static mixer. These "In Stock" mixers feature very high mixing efficiency with short mixing length. The Komax motionless mixer achieves high efficiency through triple action mixing. They are designed for use where additives to... (Read More)
Komax Static Mixer - Ozone
Ozone Mixer2200% Improved Ozone Contacting Integrated Ozone Injector availableKomax carries a complete line of standard and custom ozone mixers.These ozone mixers are available with or without the patented Komax ozone injector.Komax ozone mixers are ava... (Read More)
Komax | Static Mixer Sanitary
Komax in-line motionless static mixers convert a multiple component input stream into a uniformly blended output. They find applications in mixing a wide range of food products. These include "solid" materials such as margarine and tomato pastes, viscous liquids like syrups, and light fluids similar... (Read More)
Komax | Static Mixer - Wafer
The patented Komax Wafer Static Mixer is designed to fit between existing pipe flanges of any specification. This makes the wafer style static mixer easier for new and retrofit installations when there is limited space available and you are not able to install a traditional static mixer. In addition... (Read More)
Komax | Ultra Static Mixer
Ultra mixer technology is based on the concept that initial demands placed on a static mixing system at the entrance to the system are those of establishing a reasonable distribution of an additive over the entire cross-section of the pipe. This allows the downstream mixing elements to be very effec... (Read More)
Komax | Static Channel Mixer
The Komax Channel Static Mixer utilizes non-clogging mixing technology for mixing water treatment chemicals into water flowing through rectangular channels. The channel mixer can be custom designed to fit open or closed channels and of any rectangular cross section. Its open design ensures low head ... (Read More)
Komax | PVC Static Mixer
Komax | PFA, PVDF & PTFE Lined Static Mixers
Teflon lined static mixers and Kynar lined static mixers are used for applications where harsh chemicals need to be mixed without pipeline corrosion. When mixing harsh and aggressive chemicals, there is a need for corrosion-resistant inline static mixers. Komax Systems has Komax corrosion-resistant ... (Read More)
Eaton | Duplex Basket Strainer
Eaton’s Manual Strainers are used by industrial and commercial customers to protect their process piping equipment by removing debris from the liquid that flows through pipelines. Products include Y strainers, simplex basket strainers, duplex basket strainers, compact multi-basket strainers, t... (Read More)
Eaton | Simplex Basket Strainer
Simplex basket strainers are used where the line can be shut down for short periods to clean or change baskets. Eaton standard cast pipeline strainers meet customers’ expectations and the highest standards, including:Simplex basket strainers are used when liquids require regular or... (Read More)
Eaton | Y-Strainer
Eaton Y strainers are a cost-effective solution for the mechanical removal of unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipm... (Read More)
Eaton | Industrial filter bags
The convenience and economy of liquid bag filtration is now feasible for filtration applications that previously required other, more expensive systems.Because demanding or critical applications can be complex, an Eaton Applications Specialist is available to perform a no-obligation anal... (Read More)
Metaforge | Flanges
Flanges are used to connect pipes with each other, to valves, to fittings, and to specialty items such as strainers and pressure vessels. Forged Flanges manufactured accordi... (Read More)
EVR | Concentric & Eccentric Reducer Connector
The PC-35 Pump Connectors are designed specifically to reduce and isolate noise and vibration from pumps and other operating equipment. Available with working pressures up to 300 psi, and all types of elastomers in... (Read More)
EVR | DF-60 Flue Duct Connector
Available in round or rectangular configurations, the DF-60 is designed for use in duct systems where pressure, abrasion and mechanical movement preclude the use of conventional ducting connectors. The external metal reinforcement and high strength synthetic reinforcing fabrics allow working pressur... (Read More)
EVR | Duct Connectors – Series DF/DB
Flue Duct Connectors are designed to absorb thermal movements and vibrations in industrial duct work. They are designed to handle hot corrosive gases found in industrial ducting systems and eliminate vibration cause by equipment such as fans, scrubbers, and mechanical dust collectors.... (Read More)
EVR | Concentric and Eccentric Joints – Series CJ-31 and EJ-41
For situations where piping diameters of different sizes must be connected, EVR’s Concentric and Eccentric Joints – Series CJ-31 and EJ-41 are the answer. Manufactured to the stringent standards of EVR’s product lines, these units can be engineered for specific material situatio... (Read More)
EVR | Material Handling Hose – Series MHH
The MHH Series are similar to EVR’s series of pump connectors in that engineering and materials can be matched to any situation. Available in diameters ranging from 1 to 24 inches and in lengths up to 50 feet. The MMH Series are available with full face flanges and backing rings, built-in s... (Read More)
EVR MJ Series | Expansion Joint
A low cost, double-width arch, externally reinforced, moulded butyl expansion joint with twice the movement capability of standard expansion joints.... (Read More)
EVR | OJ Series Slip-On Expansion Joint
EVR’s OJ Series Slip-On expansion joint offers the perfect solution for new and existing installations. Its high degree of flexibility insulates and protects equipment from the damages of vibration and can easily accommodate normal misalignments.... (Read More)
EVR | RE Series Rubber Elbow Connectors
Piping systems often fail to align properly with equipment and can change piping geometry. EVR’s flexible slurry fittings provide a practical and economical solution to these problems while reducing vibration and noise and providing improved wear resistance.... (Read More)
EVR | SJ-205 Expansion Joint
Manufactured with a streamlined, self-cleaning arch, EVR’s SJ-205 is designed to absorb vibration and eliminate buildup of suspended materials in the system flow. The SJ-205 expansion joint achieves considerable flexibility – rivalling standard multi-arch designs – with a single ar... (Read More)
EVR | SJ 21 Rubber Expansion Joint
The SJ-21 is the industry standard spool-type expansion joint. The SJ-21 is available in configurations from zero to four arches – depending on movement requirements – and 3 standard pressure ratings in a variety of elastomers. This hand-built expansion joint can be adapted to the mos... (Read More)
Protego | Floating Suction Units
PROTEGO® Floating Suction Units, FSU, are used in storage tanks with very high purity requirements of the substances, e.g., aviation or fossil fuels. They are designed to ensure that product in a... (Read More)
Metaforge | Rings, Flushing Rings and Drip Rings
Drip Rings, or Flushing Rings, are used in the oil or gas line. They are coupled between two seals. The Drip Ring is circular, as a ring, with one or two holes. They may have one or two branches, based the usage that is made for.... (Read More)
Metaforge | Self-Reinforced Nozzles
Self-reinforced nozzles are those that do not have any additional kind of reinforcement (pad) attached, and all the welds between its own components and between the nozzle and the vessel are full penetration type.... (Read More)
Metaforge | Stub Ends
Stub ends are installed in pairs and mated together with two lap joint flanges.The surface of the stub end has a phonographic serrated gasket surface which prevents leakage at the joint.Using stub ends allows sections of the line to be opened for cleaning, inspection or quick replacement etc, withou... (Read More)
Metaforge | Tube Sheets
A tube sheet is usually made from a round flat metal plate or sheet with holes drilled to accept the tubes or pipes in an accurate location and pattern relative to one another. ... (Read More)
MAC3 | Float Switch
Level regulator with electrical equipment.The level regulator is a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached. Inside the device there is a microswitch that, dep... (Read More)
Monitor | Capacitance Probe MK-2 / MK-2e
TrueCap® RF capacitance sensors offer cost-effective point level monitoring with reliability you can count on. Monitor’s complete line, which features models MK-2 and MK-2e, provides you with the most affordable solution for your application. Monitor’s RF capacitance probes are desig... (Read More)
Monitor Diaphragm Switch
Monitor’s line of BINATROL diaphragm bin monitors consists of economical, reliable, and durable point level controls for point level detection of dry bulk materials. The units can be used to eliminate bin overflow, maintain a predetermined material level, indicate plugging of chutes or conveyo... (Read More)
Monitor | KAX Rotary Paddle Switch
Monitor's KAX line of rotary paddle bin level indicators consist of the most reliable, rugged and economical point level control sensors available for detection of dry bulk materials. These easy to install sensors are proven performers in a wide variety of bulk materials. Monitor's paddle switches c... (Read More)
Monitor | PZP Vibratory Probe
The PZP vibratory level sensor provides reliable point level detection in a wide variety of process control applications within the powder and bulk solids market. The PZP offers many advantages over alternative technologies. The vibrating probe principle eliminates problems associated wit... (Read More)
Monitor | Safepoint Rotary Paddle Switch
The SafePoint® rotary paddle level switch with a self-validating design detects and indicates material presence or absence plus it continuously monitors its own ability to function. This functional analysis includes verification of overall electro-mechanical sensor h... (Read More)
Monitor | Tilt Switch
Monitor’s line of tilt bin level switches are economical, trouble-free point level controls available for detection of dry bulk materials. The units can be used as high level indicators to eliminate bin overflow or to control levels in open piles. In addition, the tilt switches are useful in d... (Read More)
Monitor | VibraRod Vibratory Probe
The Model VibraRod™ is a vibration type level indicator that provides reliable, durable and versatile point level sensing in a variety of applications within the powder and bulk solids markets. The vibratory sensor has a single probe design that is self-clea... (Read More)
Valbia | Electric Actuator
Valbia Electric actuators are suitable for the automation of ball and butterfly valves for the industrial and construction sector. The usage of electronic components of last genereation, together with precise mechanic, careful research and developement, enables high performance and long term reliabi... (Read More)
Valbia | Pneumatic Actuators
Valbia manufactures rack and pinion pneumatic actuators, available in spring return or double acting version, with 0°-90° standard rotation or 0°-180°. This type of actuator is mainly used in industri... (Read More)
VAG ROTOP - Portable Electric Actuator
An actuator is a device that produces rotary or linear motion for various purposes. It requires an energy source and provides the basic mechanism through which a control signal operates. Metaval sells and supplies a wide range of industrial actuators in Australia.... (Read More)
Metaflow | Orifice Meter Runs
A Meter Run is an assembly composed of an orifice plate with flanges and upstream and downstream sections of pipe... (Read More)
Metaflow | Orifice Flange Assembly
Orifice Flanges are used instead of standard pipe flanges when an orifice plate must be installed.... (Read More)
Metaflow | Concentric Square Edge Orifice Plate
These plates are most commonly used devices for flow measurement for clean liquids, gasses and low velocity vapour (steam) flows. These plates have a sharp, Square edged hole bored in a flat thin plate with or without bevel at the outlet depending on size & usage. These plates are also used for ... (Read More)
Metaflow | Eccentric Orifice Plate
Eccentrically bored orifice plates are plates with the orifice off-center, or eccentric, as opposed to concentric. The bore of the eccentric orifice normally is inscribed in a circle which is 98% of the pipe diameter, so that solids or slurries may pass through. Eccentric orifice plates are used in ... (Read More)
Metaflow | Conical Entrance Orifice Plate
These conical entrance orifice plates are used for low Reynolds number in the range of 80 to 2000 and give more constant or predictable discharge coefficient. At lower Reynolds numbers, the discharge coefficient of square edge orifice plate may ... (Read More)
Metaflow | Quadrant Edge Orifice Plate
The quadrant edge bore is an orifice with the inlet edge rounded. Instead of beveling, the plate is counterbored to the desired edge thickness.This bore is specifically designed for viscous fluids such as heavy crudes, syrups, and slurries with ... (Read More)
Metaflow | Segmental Orifice Plate
The bore is shaped as segment of a circle. This is used for colloidal and slurry flow measurement... (Read More)
Metaflow | Multihole Orifice Plate
A multi-hole orifice plate (or conditioning orifice plate) behaves like a flow conditioner. In addition to allowing flow measurement, it stabilizes the flow and thus requires reduced upstream and downstream straight lengths compared to other ori... (Read More)
Metaflow | ISA 1932
The ISA 1932 Nozzle is used for high velocity, non-viscous, erosive flows which would wear or damage an orifice plate.... (Read More)
Metaflow | Long Radius Flow Nozzle
Flow nozzle with smooth elliptical inlet to throat section with sharp outlet. Uncalibrated uncertainty: ±2% and normally used for liquid or gas fluids flow rate including vapor, non-viscous, corrosive and fluids with high speed velocity.... (Read More)
Metaflow | PTC-6
This flow nozzle provides high accuracy and precision required by ASME PTC-6 in steam turbine testing applications.... (Read More)
Metaflow | Venturi
Venturi are used to measure the speed of a fluid, by measuring the pressure changes from one point to another along the venture.... (Read More)
Metaflow | Venturi Nozzle
Venturi Nozzles combine the best features of a Venturi tube and a flow nozzle into one single unit. These accurate devices are ideal for measuring the flow of high velocity, non-viscous fluids (e.g. Steam and other high velocity gases). Venturi Nozzles are particularly suitable for erosive fluids wh... (Read More)
Metaflow | Wedge Flow Meter
The meter consists of a flowing body with a Wedge “V” shape throttle restriction. It is bi-directional and extremely robust, particularly suitable for fluids with a high solid content, erosive/abrasive, and with a high viscosity.... (Read More)
Metaflow | V-cone
The Cone meter accelerates the flow to the outside of the pipe by having a cone positioned pointing up the center line of the incoming flow. The upstream tapping is on the wall of the pipe but the downstream tapping is not on the wall of t... (Read More)
Metaflow | Average Pilot Tube
Metabar (multi-port, averaging pitot tube) are easily implementable across a diverse range of environments, such as, high pressure conditions and high temperature conditions, in circular or rectangular pipes or ducts. Ideal for Steam mass flow m... (Read More)
Metaflow | Thermowell
A thermowell is a structure that surrounds the thermocouple (or RTD) probe and protects it from aspects of the process such as fluid flow rates or caustic or degrading materials.... (Read More)
Metaflow | 5 Valve Manifold
The 5 Valve Manifolds that concentrate in a single block the functions of isolation, equalise and vent are designed to allow both direct and remote mounting. ... (Read More)
Metaflow | 3 Valve Manifold
A three-way manifold valve is a mechanism that prevents the capsule from being over-ranged. It also permits the transmitter to be separated from the process loop. It comprises two block valves, one for high pressure and the other for low pressur... (Read More)
Metaflow | 2 Valve Manifold
2 Valve Manifolds combines valves into one block to perform isolation, bleed and calibration of pressure transmitters, gauges and switches. Process, Instrument and Vent connections can be provided in a variety of sizes and threaded forms.... (Read More)
Metaflow | Pressure Gauge Valve
Pressure gauges valves are shut-off and throttle valves for pressure measuring instruments, for measuring liquids, gases and vapours.... (Read More)
Metaflow | Needle Valve
A needle valve is used to accurately control flow rates of clean gasses or liquids. Gradual adjustments of the stem and plunger enable smooth flow control.... (Read More)
Metavalve | Globe Valve
A Globe valve is a linear motion valve and are primarily designed to stop, start and regulate flow. Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.... (Read More)
Metavalve | Gate Valve
Gate valves are designed for fully open or fully closed service. They are installed in pipelines as isolating valves and should not be used as control or regulating valve. Manufactured as per the following Design, Face to Face, and End Connection Standards. ASME, ANSI, AS, BS, API etc.... (Read More)
Metavalve | Tilting Disc Check Valve
The Check Tilting Disk Check Valve is a cost-effective valve with a unique design that provides excellent tightness and minimizes water-hammering. Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc. ... (Read More)
Metavalve | Lift Disc Check Valve
Lift Check valves are particularly suitable for high-pressure service where velocity of flow is high. Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.... (Read More)
Metavalve | Swing Check Valve
A swing check valve is mounted with a disc that swings on a hinge or shaft. The disc swings off the seat to allow forward flow and when the flow is stopped, the disc swings back onto the seat to block reverse flow. Manufactured as per the following Design, Face to Face and End Connection Standards. ... (Read More)
Metavalve | Butterfly Valve
Our range of butterfly valves extends from general purpose to severe models used for isolation and throttling applications. It includes resilient seated valves for long service life and bubble tight shutoff; high performance valves capable of temperatures from cryogenic to 1500°F (815°C) and... (Read More)
Metavalve | Ball Valve
A ball valve is a shut off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. They are characterized by a long service life and provide a reliable sealin... (Read More)
VAG | Dismantling Joint
Rigid dismantling joint with continuous anchor bolts for the easy assembly and dismantling of pipeline valves. Suitable for use in water-treatment applications, in water distribution, in waste water, in dams, in power plants, in industry and in pressure management.... (Read More)
PBM | 2-Way Clean Steam Ball valves
IMI PBM’s 2-Way Clean Steam Ball valves are designed for temperature swing and clean steam applications. Our unique Adjust-O-Seal® feature allows in-line valve adjustment to compensate for normal wear on valve seats.... (Read More)
PBM | 3 Way Pigging Valve
IMI PBM’s Pigging Valves can reduce the number of launchers and receivers required in a piping system. The smooth 120° turn through the 3-way piggable valves permits easy diverting of a line pig used to clean the pipe or tubing lines.... (Read More)
PBM | Angle Stem Flush Tank Valve
IMI PBM’s 2-Way Tank Bottom Valves are suited for sanitary tank, vessel, and reactor applications. Angle Stem Flush Tank Bottom Valves provide actuator clearance on jacketed or insulated vessels.... (Read More)
PBM | 3 Way Diverter Port Valves
IMI PBM’s 3-Way Divertor Port Valves can be an economical alternative to a 3-Way Multi-Port valve depending on the sealing requirements. A single Diverter Port can replace two or three 2-Way valves to reduce cost and space. They are an excellent choice for mounting two relief valves from a ... (Read More)
STF FMA-1000 | Self-cleaning hydraulic screen filter
Devices in the STF 1000 series are hydraulically operated Automatic screen filters which have been designed for demanding filtration tasks with low fl ow rates in municipal and agricultural applications.The hydraulic operating system and ability to operate at very low flow rates, due to low cl... (Read More)
STF FMA-1000E | Self-cleaning electric screen filter
The range of FMA-1000E STF automatic screen filters has been designed to meet your filtration needssuch as drinking water facilities, desalination plants, food industry, co-generation plants, chemicalindustry, cooling towers, field irrigation, golf courses and physical barrier against ze... (Read More)
FMA | 2000 Automatic self-cleaning screen filter electric
The range of STF automatic self-cleaning screen filters has been designed to meet your filtration needs such asdrinking water factilities, desalination plants, food industry, cogeneration plants, chemical industry,cooling towers, fi eld irrigation, golf courses and physical barrier again... (Read More)
STF FMA-4000 | Self-cleaning hydraulic screen filter
The FMA-4000 series self-cleaning hydraulic screen filter from STF, have been designed to optimizethe filtration solutions in installations without power supply. They incorporate a new cartridge thatallows to optimize the filtration screen improving the filtering capacity.... (Read More)
STF FMA-4000E | Self-cleaning electric screen filter
STF 4000E series automatic electric screen filters are designed to optimize filtration solutions inelectrical installations. It incorporates a new cartridge that allows to optimize the surface of filtrationallowing to treat greater fl ow rates. Its electrical operation system and its low... (Read More)
STF FMA-4000E+ACB mesh filters
The FMA-4000E+ACB screen filters are designed to optimize filtration solutions at electrical installations. They include a new cartridge that streamlines the filter area, enabling greater fl ow values to be achieved. The electric drive, low water consumption for cleaning and automatic cleaning syste... (Read More)
STF FMA-5000 MA-5000V | Self-cleaning electric screen filter
STF FMA-5000 automatic mesh filters are specifically designed to be installed in plants with highquality requirements and reduced installation spaces, in chemical plants, oil & gas and otherindustrial facilities. The FMA-5000 is a series of robust equipment, designed to work with dem... (Read More)
STF FMA-6000 | Debris filter
FMA-6000 debris filters are in line electric drive automatic screen filters. They operate at very low working pressures, which makes them the optimum equipment for the protection of pumping systems.... (Read More)
STF FMA-7000-UV | Self-cleaning electric screen filter
FMA-7000-UV filters with self-cleaning screen are electrically operated filters with disinfectiontreatment be means of ultraviolet lamps, specially designed for filtration at low levels of filtration anddisinfection treatment for low fl ow rates in municipal and industrial applications.... (Read More)
STF | FMA-9000 | Self-cleaning electric screen filter
The range of FMA-9000 STF automatic screen filters has been designed to meet your filtration needssuch as drinking water facilities, desalination plants, food industry, co-generation plants, chemicalindustry, cooling towers, field irrigation, golf courses and physical barrier against zeb... (Read More)
FMA-10000 | Self-cleaning electric screen filter
The range of STF automatic screen filters has been designed to meet your filtration needs such asdrinking water facilities, desalination plants, food industry, cogeneration plants, chemical industry,cooling towers, field irrigation, golf courses and physical barrier agains zebra mussels.... (Read More)
FMA-11000 | Self-cleaning electric screen filter
The range of FMA-11000 STF automatic mesh filters has been designed to meet your filtration needssuch as drinking water facilities, desalination plants, food industry, co-generation plants, chemicalindustry, cooling towers, field irrigation and golf courses.... (Read More)
STF FS | Self-cleaning suction strainer
FS filters comprise a family of self-cleaning filters which are placed in pumpintakes, submerged in reservoirs, rivers, canals, lakes and so on. They preventparticles likely to cause damage or obstructions from passing into the network.High efficiency is guaranteed thanks to the la... (Read More)
STF FMA | 1000 LP (Low pressure) | Self-cleaning hydraulic screen filter
Devices in the STF 1000 series are hydraulically operated Automatic screen filters which have been designed for demanding filtration tasks with low fl ow rates in municipal and agricultural applications.The hydraulic operating system and ability to operate at very low flow rates, due to low cl... (Read More)
STF | FCL L pattern steel filter
This range of filters operates in the same way and is produced in the same materialsas the manual mesh filters. The difference comes in the filtration level, which here isfar greater. Filtration is achieved through the physical retention of larger particlesby the filter element, wh... (Read More)
STF | FCY
FCY – Y pattern strainer This range of filters operates in the same way and is produced in the same materialsas the manual mesh filters. The difference comes in the filtration level, which here isfar greater. Filtration is achieved through the physical r... (Read More)
STF | FL L pattern steel filters
Manual filters are typically used as a safety protector. The wide range and varioustypes ensure they are an efficient, economic solution for specific applications anduses in agriculture and industry. Filtration is achieved through the physical retentionof larger particles by the fi... (Read More)
STF | FT – T pattern steel filter
This range of T-shaped fi lters comprises manually operated basket strainers. They fi lter thesurface from the inside out. They are primarily used as a safety element to protect sensitiveinstruments or as a sample fi lter to warn of possible problems at an installation.The basket s... (Read More)
STF | FY Y pattern steel filter
Manual filters are typically used as a safety protector. The wide range and various typesensure they are an efficient, economic solution for specific applications and uses inagriculture and industry. Filtration is achieved through the physical retention of largerparticles by the fi... (Read More)
STF | FY Y pattern steel filter
Manual filters are typically used as a safety protector. The wide range and various typesensure they are an efficient, economic solution for specific applications and uses inagriculture and industry. Filtration is achieved through the physical retention of largerparticles by the fi... (Read More)
STF | FYCIC Cyclone effect Y pattern steel filters
Manual filters are typically used as a safety protector. The wide range and varioustypes ensure they are an efficient, economic solution for specific applications anduses in agriculture and industry. Filtration is achieved through the physical retentionof larger particles by the fi... (Read More)
STF | PYS – Y manual screen filter
PYS – Y manual screen filter STF Filters inline filters manufactured in technical thermoplastic and designed to optimize filtration.Filtering surface dimension designed to minimize clogging and thus reduce maintenance.Easy to install and clean, not requi... (Read More)
STF | FYLCM Y pattern steel filter with manual brush
FYLCM Y pattern steel filter with manual brush Manual filters are typically used as a safety protector. The wide range and varioustypes ensure they are an efficient, economic solution for specific applications anduses in agriculture and industry. Filtration is... (Read More)
STF | MTS Manual threaded screen filter
MTS filters are the range of manual mesh filters for agriculture, water treatment andindustry applications.... (Read More)
STF | MS Manual screen filter
MTS filters are the range of manual mesh filters for agriculture, water treatment andindustry applications.... (Read More)
cleanwater1 | PAX Jet Mixers
PAX Jet Mixers create a powerful vortex flow pattern inside small-to-mid-size water storage tanks. The PAX PWM100 Jet Mixer uses a vortex nozzle to vigorously circulate the tank volume to eliminate thermal stratification, prevent ice formation, reduce residual loss and lower disinfection ... (Read More)
cleanwater1 | PAX Horizontal Mixers
The PAX PVM400 Horizontal Mixer is ideal for large, underground water storage tanks. These long and shallow tanks have numerous support columns that prevent circulation and create high water age.... (Read More)
cleanwater1 | Tank Shark® Eductor Mixer
Tank Shark® Eductor Mixers provide powerful mixing for the most challenging situations. Patented Eductor Nozzle The Eductor Nozzle puts out a 5 time flow increase to produce a 75-500 GPM upward flow utilizing 50 PSI motive water. This upward flow of water no... (Read More)
cleanwater1 | Smartboost®
Smartboost® Free Chlorine Boosting Systems utilize water storage assets as convenient and controllable intervention points for managing distribution network chlorine levels. ... (Read More)
cleanwater1 | PAX TRS™
Trihalomethanes (THMs) are chemical compounds that form when natural organic matter in water reacts with chlorine during the disinfection process. THMs are a suspected carcinogen and regulated in many countries. Exceedence of the Maximum Contaminant Level (MCL) for THMs are among the most common ... (Read More)
cleanwater1 | PowerVent®
With PowerVent®, you will add active headspace ventilation to your tank and remove air saturated with THMs while maintaining air flow rates in the range of 2,000-12,000 cfm. PowerVent® enables you to create the right conditions for mass transfer of THMs, while simultaneously reduc... (Read More)
cleanwater1 | Encore® Pumps
Encore® chemical metering pumps have provided operators with reliable, accurate and versatile pumping solutions for all types of liquid and slurry dosing. cleanwater1's chemical metering pump packages are designed to meet the needs of virtually any industrial or municipal liquid chemi... (Read More)
cleanwater1 | Chemtube®
The Chemtube® 2000 Metering Pump is a high capacity, hydraulically actuated, tubular diaphragm metering pump. Designed for long service under the severest conditions, the Chemtube® 2000 pump offers accurate metering of a wide variety of chemicals for any process application.... (Read More)
cleanwater1 | Glass Tube Purge Meter
Glass tube purge meters have a rugged stainless steel frame, are available in 1½- inch and 3-inch scale lengths and use a high-stability float for accurate, repeatable performance. Meters can be supplied with flow controllers and plastic bezels for flush mounting (not available with 1&frac... (Read More)
cleanwater1 | Arma-View®II Purge Meter
The Arma-View® II Low Flow Armored Purge Meter is designed for the measurement of low volume flows of aggressive chemicals. The strong meter construction provides reliable metering of gases and liquids at high pressure and temperature ratings. Low-flow, high-temperature and pressure a... (Read More)
cleanwater1 | Armored Purge Meters - Metal Frame
The Armored Purge Meter operates over a 10:1 range. Scales are 1¼ inches long. The ½-inch meter has a GPH or SCFH scale; the ¾-inch meter, a GPM or SCFM scale. Each also has a percent scale. The snubber on the float causes readings to steady out quickly. This gi... (Read More)
cleanwater1 | Armored Flow Meters - Series 55-200
The Series 55-200 Armored Flow Meter is an inexpensive, 5% accuracy flowmeter. This all metal meter gives reliable flow indication of aggressive fluids making it ideal for high-pressure and high-temperature flow applications. Its plug and orifice design, overall simplicity, and minimal parts add ... (Read More)
cleanwater1 | Glass Tube Varea-Meter® Flow Meter
Varea-Meters units are designed for high volume flows. Metering accuracy is 2% of full scale over a 10:1 range. The advanced design of the float and the tapered tube extends the meter capacity to match that of comparable meters costing much more. Varea-Meter® flow meters are available... (Read More)
cleanwater1 | Metal Tube Varea-Meter® Flow Meters
Metal Varea-Meter® Variable Flow Meters are designed for high volume flows. The advanced design of the float and the tapered tube extends the meter capacity to match that of comparable meters costing much more. The strong steel construction makes these meters suitable for a broad spectrum of ... (Read More)
cleanwater1 | Dynajet™
The Dynajet™ technology uses a blower-induced pneumatic conveyance system to transfer up to 12 lbs of polymer per minute from the volumetric feeder to the wetting head, with higher capacity custom systems available. The polymer is naturally dispersed in the conveyance air... (Read More)
