The Armored Purge Meter operates over a 10:1 range. Scales are 1¼ inches long. The ½-inch meter has a GPH or SCFH scale; the ¾-inch meter, a GPM or SCFM scale. Each also has a percent scale.
The snubber on the float causes readings to steady out quickly. This gives true readings down to atmospheric pressures. The O-ring at the top of the float seals against the seat to prevent back flow through the meter. A port in the bottom of the meter body makes it easy to clean.
The stainless steel and welds in our Armored Purge Meters resists sulfides by conforming to NACE Standard MR-01-75 covering hydrogen sulfide-resistant surfaces. The 316 stainless steel body with Buna N or TFE O-rings gives corrosion resistance and reliable operation to 1500 psi (10 bar) and 800°F (427°C) (600°F (316°C) with flow switch). A heavy stainless sheath encloses the scale tube, which is sealed at both ends by O-rings.At no time is the glass scale tube exposed to the process fluid. A stainless steel sheath encloses the O-ring sealed glass tube. Flow switch available.
Features
- Rugged construction
- Resists attack by sulfides
- Accurate gas metering
- Built-in backcheck
- Easy to clean
Benefits
- Reduced maintenance cost without removing meter from service
- Stands up to extreme conditions with rugged construction
- Reliable long term performance in gas or liquid service
- Highly accurate and stable readings for precise measurement and control
- Easily adaptable to fit your exact needs with standard options
| Specification | Refer to the pdf in the resource section |
| Dimension | Refer to the pdf in the resource section |
