- A ball valve is a shut off valve that controls the flow of a liquid or gas by means of a rotary ball having a bore. By rotating the ball a quarter turn (90 degrees) around its axis, the medium can flow through or is blocked. They are characterized by a long service life and provide a reliable sealing over the life span, even when the valve is not in use for a long time.
4 Way Ball Valve: A four-way valve uses a series of ports to control flow of fluids in different directions using a single valve. The design can have a single inlet port with three outlet ports, or two inlet and outlet ports to control flow from two different sources. Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.
3- Way (L-Port & T-Port): An L-Port can send flow one way or the other or can shut it off completely. A T-Port will perform all the same flow tasks as an L-Port but cannot be shut off. Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.
Trunnion: Trunnion ball valves are quarter-turn valves which are used to stop or start the flow of a media in a pipeline.
Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.Floating: A floating ball valve uses a ball as the structure to close the cross-section of the pipe and prevent the flow of the fluid.Manufactured as per the following Design, Face to Face and End Connection Standards. ASME, ANSI, AS, BS, API etc.
Design Options: Quarter Turn
Cryogenic Design
Fire Safe Design
On Request*Operations:Chain & Wheel
Gear Box
Position Indicator Actuator
Extended Bonnet
By-Pass Arrangement
On Request*
| Manufacturing Processes: | Forging and casting |
| End Connection: | Screwed, Flange End (RF / RTJ ), Butt Weld, Socket Weld |
| Body Material | CS, LTCS, Ductile Iron, SS304/L, SS316/L/H, 321, 410, F5, F11, F12, F22, F9, Duplex, Super Duplex, Monel, Inconel, Hastelloy, On Request* |
| Trim Material | SS304/L, SS316/L, 410, 416, Stellite Hard Facing, On Request |
| Size & Pressure Rating: | ".5” to 36” (15-900mm) | Class 150# to 2500# Higher Pressure Rating & Larger Sizes On Request* |
